
Our 10-step process for installing new gaskets equals a first-class result. First, we inspect the equipment before removing the old gasket and cleaning the plates. This is followed by a dye test and second inspection, removal of the dye residue, cleaning of the gasket groove and final plate inspections. The new plates are then fitted and quality checked.
10-Step-Process

1. Initial inspection & creation of the report

2. Removal of old gaskets

3. Chemical cleaning (acid or caustic bath), high-pressure cleaning

4. Dye test and second inspection (record results)

5. Removal of residues after a dye penetration test

6. Cleaning of gasket groove

7. Final inspection of each plate: replacement of damaged plates

8. New gaskets are fitted

9. For glued gaskets - tensioning of plate pack and glue curing in an oven

10. The final stamp of approval after final inspection and careful packaging of the plate pack