Reconditioning Process
Provided by 
Our 10-step process for installing new gaskets equals a first-class result. First, we inspect the equipment before removing the old gasket and cleaning the plates. This is followed by a dye test and second inspection, removal of the dye residue, cleaning of the gasket groove and final plate inspections. The new plates are then fitted and quality checked.
10-Step-Process
1. Initial inspection & creation of the report
2. Removal of old gaskets
3. Chemical cleaning (acid or caustic bath), high-pressure cleaning
4. Dye test and second inspection (record results)
5. Removal of residues after a dye penetration test
6. Cleaning of gasket groove
7. Final inspection of each plate: replacement of damaged plates
8. New gaskets are fitted
9. For glued gaskets - tensioning of plate pack and glue curing in an oven
10. The final stamp of approval after final inspection and careful packaging of the plate pack